WAXJET CONSUMABLES · SUPPORT MATERIAL
WaxJet 51C
Support wax
White. Dissolves away.
Genuine Flashforge FFMS3200 white support wax for the WaxJet 51C. It holds up overhangs and fine details while your pattern prints, then dissolves away, so there is no support clipping and few marks on the pattern. Check the soak time to protect fine detail.
A$290
per pack of 8 blocks, supplied from Sydney
AT A GLANCE
One pack, 1.44 kg of support.
8
   BLOCKS PER PACK
180 g
     PER BLOCK
55 °C
   MELTING POINT
0
   SUPPORTS TO CLIP
WHY IT MATTERS
Support that leaves no trace.
Hands-free removal
The white wax dissolves away after printing, so fine prongs, pavé seats and filigree are never cut or marked.
Melts lower
Support wax melts at about 55 °C (SDS range 55 to 65 °C), lower than the red model wax at 68 °C. Remove it with the solvent bath, not heat.
Made for the WaxJet 51C
Sized as 180 g blocks for the WaxJet 51C material supply, which feeds wax on demand and keeps it from degrading.
IN THE WORKFLOW
Print, dissolve, cast.
Every WaxJet 51C print uses red model wax for the pattern and white support wax underneath and around it. Once the plate is done, the support wax dissolves in a warm bath, leaving a clean red pattern ready for spruing.
Pair it with build wax
Keep red FFWJ1200 build wax in stock too: see WaxJet 51C build wax, and our wax post-processing guide for the bath steps and temperatures.
SPECIFICATIONS
FFMS3200 support wax.
Material type
FFMS3200
Support material
Colour
FFMS3200
White
Composition
FFMS3200
Wax support material
Block weight
FFMS3200
180 g
Pack
FFMS3200
8 blocks, 1.44 kg
Melting point
FFMS3200
55 °C
Density (liquid at 90 °C)
FFMS3200
0.79 g/cm³
Removal
FFMS3200
Dissolvable, hands free
Compatible printer
FFMS3200
Flashforge WaxJet 51C
Figures are Flashforge's published material specifications for FFMS3200 on the WaxJet 51C. Download the Safety Data Sheet for handling and storage information.
Keep your WaxJet 51C printing.
Order genuine support wax from 3D Werk in Sydney, and keep the Safety Data Sheet on file for your workshop.
