WAXJET CONSUMABLES · BUILD MATERIAL
WaxJet 530
Build wax
Red. 100% castable.
Genuine Flashforge FFWJ1200 red model wax for the WaxJet 530, supplied in a 3.0 kg bottle rather than small blocks. The WaxJet 530 takes both 1.5 kg and 3.0 kg bottles. The same bottle fits the WaxJet 510, and the bigger fill means fewer refills on long, unattended runs.
A$1,280
per 3.0 kg bottle, supplied from Sydney
AT A GLANCE
One bottle, 3.0 kg of wax.
3.0
KG PER BOTTLE
530
FITS WAXJET
68 °C
MELTING POINT
<0.01%
ASH CONTENT
WHY GENUINE WAX
Made for the WaxJet 530.
Tougher red wax
Flashforge's red wax gives higher strength and toughness with a lower risk of cracking, so fine prongs and filigree survive handling.
Clean burnout
100% wax with ash under 0.01% (Flashforge figure), so it is designed to burn out like the wax you already cast, with no resin residue. Run a test flask first.
Published wax shrinkage
Flashforge publishes 0.7% linear and 1.1% volumetric wax shrinkage. Metal and investment shrinkage come on top, so cast a test piece.
IN THE WORKFLOW
From bottle to casting.
The WaxJet 530 melts the red model wax and jets it in fine layers, while white support wax holds overhangs. After printing, the support wax dissolves away and the red pattern goes straight to spruing and investing.
Pair it with support wax
Every print also uses FFMS3200 white support wax. See WaxJet 530 support wax, and our wax post-processing guide for the support removal steps.
SPECIFICATIONS
FFWJ1200 model wax.
Material type
FFWJ1200
Part (model) material
Colour
FFWJ1200
Red
Composition
FFWJ1200
100% wax
Bottle size
FFWJ1200
3.0 kg
Options
FFWJ1200
1.5 kg or 3.0 kg bottles (WaxJet 530)
Softening point
FFWJ1200
63 °C
Melting point
FFWJ1200
68 °C
Density (liquid at 90 °C)
FFWJ1200
0.79 g/cm³
Linear shrinkage
FFWJ1200
0.7%
Volumetric shrinkage
FFWJ1200
1.1%
Needle penetration
FFWJ1200
9
Ash content
FFWJ1200
Under 0.01%
Compatible printer
FFWJ1200
Flashforge WaxJet 530 and WaxJet 510
Figures are Flashforge's published material specifications for FFWJ1200. The WaxJet 51C uses the same red wax in 72 g blocks, sold separately. Download the Safety Data Sheet for handling and storage.
Keep your WaxJet 530 printing.
Order genuine build wax from 3D Werk in Sydney, and keep the Safety Data Sheet on file for your workshop.
