WAXJET CONSUMABLES · SUPPORT MATERIAL
WaxJet 530
Support wax
White. Dissolves away.
Genuine Flashforge FFMS3200 white support wax for the WaxJet 530, supplied in a 3.6 kg bottle. It holds up overhangs and fine details while your pattern prints, then dissolves away in an IPA bath, so there is no support clipping. The same bottle fits the WaxJet 510.
A$645
per 3.6 kg bottle, supplied from Sydney
AT A GLANCE
One bottle, 3.6 kg of support.
3.6
KG PER BOTTLE
530
FITS WAXJET
55 °C
MELTING POINT
0
SUPPORTS TO CLIP
WHY IT MATTERS
Support that leaves no trace.
Hands-free removal
The white wax dissolves away after printing, so fine prongs, pavé seats and filigree are never cut or marked.
Melts lower
Support wax melts at about 55 °C (SDS range 55 to 65 °C), lower than the red model wax at 68 °C. Remove it with the solvent bath, not heat.
Made for the WaxJet 530
Supplied in bottles that fit both the WaxJet 530 and WaxJet 510, so a full plate keeps printing through long, unattended runs.
IN THE WORKFLOW
Print, dissolve, cast.
Every WaxJet 530 print uses red model wax for the pattern and white support wax underneath and around it. Once the plate is done, the support wax dissolves in an IPA bath at about 38 °C, leaving a clean red pattern ready for spruing.
Pair it with build wax
Keep red FFWJ1200 build wax in stock too: see WaxJet 530 build wax, and our wax post-processing guide for the bath steps and temperatures.
SPECIFICATIONS
FFMS3200 support wax.
Material type
FFMS3200
Support material
Colour
FFMS3200
White
Composition
FFMS3200
Wax support material
Bottle size
FFMS3200
3.6 kg (WaxJet 530), 1.6 kg (WaxJet 510)
Removal bath
FFMS3200
Industrial IPA over 99%, about 38 °C
Melting point
FFMS3200
55 °C
Density (liquid at 90 °C)
FFMS3200
0.79 g/cm³
Removal
FFMS3200
Dissolvable, hands free
Compatible printer
FFMS3200
Flashforge WaxJet 530 and WaxJet 510
Figures are Flashforge's published material specifications for FFMS3200. The WaxJet 51C uses the same support wax in 180 g blocks, sold separately. Download the Safety Data Sheet for handling and storage information.
Keep your WaxJet 530 printing.
Order genuine support wax from 3D Werk in Sydney, and keep the Safety Data Sheet on file for your workshop.
